Isomalt Tubes
September 1st, 2009
Heat isomalt in a pot to
180 degrees Celsius. Heat silicon cylinder molds in the oven at 85 degrees Celsius for 5 minutes. When the isomalt is ready,
pour it into molds. When it stops bubbling, turn the mold upside down to drain the excess. Scrape the top of the mold with a small palate knife. Heat the palate knife with a torch and then smooth off tops of isomalt tubes. Carefully un-mold and store in an airtight
container with silica gel.
Related posts:
Posted in L2O